Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Pembroke Pines?
Chimney liner replacement in Pembroke Pines typically costs between $2,200 and $6,800, and a rebuild of the chimney crown, brickwork, or upper flue runs anywhere from $3,500 to $15,000 depending on how much structure has to come down and be rebuilt. A straightforward stainless liner for a single-story ranch home usually lands near the low end, while a full-height rebuild on a two-story home with damaged masonry pushes toward the top. Every job here starts with an inspection, and the written estimate you get afterward sets the final price.
We’re Monarch Chimney Sweep, a chimney specialist working with professional-grade materials like DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. Our technicians have up to 8 years of experience. Call (855) 701-1714 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Liner replacement: $2,200 – $6,800 typical in Pembroke Pines.
- Partial rebuild: $3,500 – $9,000 for crown, flashing, and upper masonry.
- Full chimney rebuild: $8,000 – $15,000 when the whole stack comes down to the roofline.
- Inspection first: every recommendation starts with a documented inspection, not a visual once-over.
- Prices are estimates. Your written estimate sets the final number.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here’s what the line items look like in the Pembroke Pines market for 2026. These are typical ranges, not quotes. The estimate we write after inspecting your flue is what you actually pay.
| Line Item | Typical Range | What It Covers |
|---|---|---|
| Inspection (Level 1 or 2) | $150 – $400 | Documented evaluation of the flue, liner condition, crown, and cap |
| Stainless flexible liner (single-story) | $2,200 – $4,200 | DuraFlex flexible liner, insulation, top plate, and connections |
| Stainless flexible liner (two-story) | $3,500 – $6,800 | Same system, longer flue run, more height and staging |
| HeatShield flue resurfacing | $1,600 – $3,400 | Restores a deteriorating clay flue without a full liner replacement |
| Crown rebuild | $850 – $2,400 | New mortar crown, proper slope, and sealant at the top of the stack |
| Flashing repair or replacement | $400 – $1,200 | Seals the roof-to-chimney joint against water intrusion |
| Partial rebuild (upper stack) | $3,500 – $9,000 | Rebuild brickwork and mortar in the top section of the chimney |
| Full rebuild to roofline | $8,000 – $15,000 | Complete teardown and rebuild of the chimney structure |
| Cap and damper (Gelco, Famco) | $250 – $700 | New cap, damper hardware, and top-mount components |
What drives the number up: height of the flue, whether the masonry has spalled or softened, whether the crown has failed, and how much staging the roof requires. A gas appliance or wood-burning insert sometimes needs a specific liner size and a direct-vent configuration, which changes material cost. What drives it down: catching a cracked flue early, before water has worked into the brick, and choosing HeatShield resurfacing instead of a full re-line when the flue only needs resurfacing.
One honest note on the trade: liner and rebuild pricing varies by scope far more than by brand. A cheap liner installed without insulation or a proper top plate is a different product than a DuraFlex system installed to spec. We quote the second.
What Affects Chimney Liner & Rebuild Pricing in Pembroke Pines
- Flue height and roofline access. Pembroke Pines has a lot of single-story and low-pitch two-story homes. A single-story ranch with a short flue keeps the liner job near $2,200 – $4,200; a taller two-story stack pushes it toward the top of the range because more material and more staging go into the job.
- Condition of the clay flue tile. If the tile is cracked or spalling, the liner has to be sized and insulated to bridge the damage. If the flue is intact but rough, HeatShield resurfacing often does the job for less than a full re-line. The inspection tells you which.
- Water intrusion at the crown and flashing. South Florida’s afternoon storms are hard on crowns and flashing. A failed crown lets water into the stack, which is what turns a $1,000 crown repair into a $9,000 partial rebuild. Fixing the top early is the single biggest cost saver here.
- Type of appliance. A wood-burning fireplace, a wood insert, and a gas appliance each need a liner sized and rated for that use. An insert with a larger flue collar can require a different liner diameter, and that changes the material line.
- Masonry condition below the roofline. If the rebuild extends below the roof deck into the chase, cost climbs fast. Rebuilds that stay above the roofline are more predictable.
- Cap and damper hardware. A missing or rusted cap lets rain and pests in. Gelco and Famco caps and dampers are the professional-grade hardware we specify, and they add $250 – $700 to a job while protecting everything underneath.
How to Save on Chimney Liner & Rebuild
The biggest savings come from calling before small problems become structural. A crown that’s starting to crack is an $850 – $2,400 fix. The same crown left alone for a couple of storm seasons can soak the brick and turn into a partial rebuild at three to four times the cost. Inspect first, recommend second – that sequencing protects your wallet.
Other practical moves:
- Get the inspection on record. A documented inspection with photos tells you exactly what needs work and what can wait. That’s the difference between a targeted repair and a contractor guessing at the whole stack.
- Ask about HeatShield before you commit to a full liner. Resurfacing restores a deteriorating flue without tearing out and replacing the whole liner system. It’s a specialist process, and it’s the repair that fits when the clay is rough but not collapsed.
- Fix the crown and cap at the same time as the liner. Bundling top-of-stack work into one visit avoids paying twice for the same staging and access.
- Keep water out. A proper cap and a sealed crown are cheap insurance against the water damage that drives rebuild costs. Replace a rusted cap before it fails.
- Don’t patch a soft brick with mortar. Smearing mortar over spalled brick closes a ticket, not a problem. If the masonry is soft, it needs to be rebuilt or the crown will fail again.
We offer free estimates, and the written estimate is what sets your final price. Call (855) 701-1714 to schedule the inspection that starts the process.
Why Professional-Grade Materials Matter on a Liner or Rebuild
A chimney liner is a life-safety system, not a cosmetic upgrade. It carries combustion gases out of the home and protects the framing around the flue from heat. When a liner fails, the failure mode is carbon monoxide or heat transfer into wood framing – not a stain on the wall. That’s why the materials matter more than the price tag on the invoice.
We work with an industry-vetted lineup: DuraFlex flexible liner systems for new installs and re-lining damaged masonry flues, HeatShield for resurfacing, and Gelco, Famco, and Copperfield for caps, dampers, and venting components. These are the brands professional masons and certified chimney installers specify, not hardware-store substitutes. Olympia Chimney rounds out the lineup for liner and venting work. Built to the Monarch standard means the materials hold up past the first warranty conversation.
We cover the full chimney lifecycle under one specialist: sweep, repair, and inspection. If you’re in Pembroke Pines, that means no referral runaround when the inspection turns up a problem the sweep didn’t expect. One specialist for the full chimney system.
Repair or Replace: Which Way Does the Estimate Point?
The rule of thumb we use: if the flue tile is intact and the crown is sound, a liner is the answer. If the clay has cracked through or the masonry above the roofline has gone soft, a rebuild or a HeatShield resurfacing plus crown work is the answer. The inspection tells you which one you’re looking at, and the estimate prices it.
- Liner replacement is the right call when the flue is structurally sound but the existing liner is cracked, unlined, or undersized for the appliance.
- HeatShield resurfacing fits when the flue is rough or spalling but not compromised, and you want to restore it without a full re-line.
- Crown and flashing repair is the call whenever water is getting in and the brick below is still solid.
- Partial or full rebuild is the call when the masonry itself has failed and patching would only mask the problem.
If you’re unsure which category you’re in, that’s exactly what the inspection resolves. Call (855) 701-1714 for a free estimate.
FAQs – Chimney Liner & Rebuild Cost
How much does chimney liner replacement cost in Pembroke Pines?
Chimney liner replacement in Pembroke Pines typically runs $2,200 – $4,200 for a single-story home and $3,500 – $6,800 for a two-story flue, including the DuraFlex liner, insulation, and top plate. The written estimate sets the final price. Call (855) 701-1714 for an exact quote – estimates are free.
How much does a chimney rebuild cost in Pembroke Pines?
A partial rebuild of the upper stack typically costs $3,500 – $9,000, and a full rebuild to the roofline runs $8,000 – $15,000. Crown-only work is much less, at $850 – $2,400. The scope depends on how much masonry has failed, which the inspection documents. Call (855) 701-1714 for a free estimate.
Is it cheaper to repair or replace a chimney liner?
Repair is usually cheaper when the flue is intact – HeatShield resurfacing at $1,600 – $3,400 replaces a full re-line at $2,200 – $6,800 and restores the flue without tearing out the liner system. Replace the liner when the existing one has actually cracked or failed. Call (855) 701-1714 and we’ll tell you which one your flue needs.
Can you come today?
Same-day service is often possible for inspections and liner work. Call (855) 701-1714. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening.
How long does a chimney liner installation take?
Most liner installations take one day, and a partial rebuild typically takes two to three days depending on weather and scope. The estimate spells out the expected timeline for your specific job. Call (855) 701-1714 to schedule the inspection that starts it.
What Happens When You Call
We start with an inspection. The technician documents what’s found on the flue, liner, crown, and cap, and photographs the problem areas. From that record, we recommend the repair that fits: HeatShield resurfacing, a DuraFlex liner, crown and flashing work, or a rebuild. Every recommendation comes with a written estimate and a clear scope, so you know what you’re paying for before anyone touches the chimney. Inspect first, recommend second.
If something has failed on a Saturday, call and we’ll book you for Sunday. We’re closed Saturday.
Get a Free Estimate on Your Liner or Rebuild
Chimney liner and rebuild pricing in Pembroke Pines in 2026 runs from about $2,200 for a single-story re-line to $15,000 for a full rebuild, with most jobs landing in the middle. The only way to know your number is to have the flue inspected and priced. Call (855) 701-1714 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Built to the Monarch standard, with professional-grade materials and a documented inspection behind every recommendation.
Pricing reflects the Pembroke Pines market as of 2026. Monarch Chimney Sweep offers free estimates – call (855) 701-1714.
Written by the team at Monarch Chimney Sweep.
What Our Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Mark Reed"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Erin Anderson"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Dustin Lawson